*******************************************************************************************************************************************************************************************

Pic-A-Day (81) Albert Mach Fine Art - Birth of the Assembly Line - Image of Ts on the assembly line.

Pic-A-Day (81) Albert Mach Fine Art.
This is a General interest post for auto aficionados sharing a pictorial history over the decades.
I hope you enjoy the educational - historical information!......
Birth of the Assembly Line - Image of Ts on the assembly line.

A few months later- in July 1908 - Sorensen and a plant foreman spent their days off developing the basics of the Assembly Line:
"What was worked out at Ford was the practice of moving the work from one worker to another until it became a complete unit, then arranging the flow of these units at the right time and the right place to a moving final assembly line from which came a finished product. Regardless of earlier uses of some of these principles, the direct line of succession of mass production and its intensification into automation stems directly from what we worked out at Ford Motor Company between 1908 and 1913...
As may be imagined, the job of putting the car together was a simpler one than handling the materials that had to be brought to it. Charlie Lewis, the youngest and most aggressive of our assembly foremen, and I tackled this problem. We gradually worked it out by bringing up only what we termed the fast-moving materials. The main bulky parts, like engines and axles, needed a lot of room. To give them that space, we left the smaller, more compact, light-handling material in a storage building on the northwest comer of the grounds. Then we arranged with the stock department to bring up at regular hours such divisions of material as we had marked out and packaged.
This simplification of handling cleaned things up materially. But at best, I did not like it. It was then that the idea occurred to me that assembly would be easier, simpler, and faster if we moved the chassis along, beginning at one end of the plant with a frame and adding the axles and the wheels; then moving it past the stockroom, instead of moving the stockroom to the chassis. I had Lewis arrange the materials on the floor so that what was needed at the start of assembly would be at that end of the building and the other parts would be along the line as we moved the chassis along. We spent every Sunday during July planning this. Then one Sunday morning, after the stock was laid out in this fashion, Lewis and I and a couple of helpers put together the first car, I'm sure, that was ever built on a moving line.
We did this simply by putting the frame on skids, hitching a towrope to the front end and pulling the frame along until axles and wheels were put on. Then we rolled the chassis along in notches to prove what could be done. While demonstrating this moving line, we worked on some of the sub-assemblies, such as completing a radiator with all its hose fittings so that we could place it very quickly on the chassis. We also did this with the dash and mounted the steering gear and the spark coil."

Implementation
The basics of the Assembly Line had been established but it would take another five years for the concept to be implemented. Implementation would await construction of the new Highland Park plant which was purpose-built to incorporate the assembly line. The process began at the top floor of the four-story building where the engine was assembled and progressed level by level to the ground floor where the body was attached to the chassis.
"By August, 1913, all links in the chain of moving assembly lines were complete except the last and most spectacular one - the one we had first experimented with one Sunday morning just five years before. Again a towrope was hitched to a chassis, this time pulled by a capstan. Each part was attached to the moving chassis in order, from axles at the beginning to bodies at the end of the line. Some parts took longer to attach than others; so, to keep an even pull on the towrope, there must be differently spaced intervals between delivery of the parts along the line. This called for patient timing and rearrangement until the flow of parts and the speed and intervals along the assembly line meshed into a perfectly synchronized operation throughout all stages of production. Before the end of the year a power-driven assembly line was in operation, and New Year's saw three more installed. Ford mass production and a new era in industrial history had begun"

Source: "Henry Ford Changes the World, 1908," Eyewitness to History (2005)

Views: 39

Comment

You need to be a member of NortheastWheelsEvents.com - Car Show Calendar to add comments!

Join NortheastWheelsEvents.com - Car Show Calendar

--------------------------------------------

CLOSE OUT SALE!!!

Cadillac At 100

Legacy of Leadership

1902-2006

2 volume, Hardcover Set

by Maurice D Hendry

Vol.1 covers from the beginning through the Classic period and into WWII. 

Vol.2 goes from fins to CTS. 

A must for any Cadillac enthusiast!

$40 + $16 Priority or $11 Media

PayPal or Cash App accepted

ORDER:

pamh00@yahoo.com

Pam 717 933-0222 Mon - Thu

COPO

CAMARO

The Chevrolet Performance Team Unleashes a Legend

Hardcover by Jeffrey K. Leestma

"For years to come, this book will be the authoritative pictorial history of the continuation of the COPO legend"

$30 + $16 Priority or $8 Media

         pamh00@yahoo.com

  Pam 717 933-0222 Mon - Thu

100 Years of Chevrolet

by by John Kramer, Ralph Burton and Jerry Durnell

160 page Hardcover

A very special, detailed history presented in a very, entertaining manner! 

$60 + $16 Priority or $10 Media

           pamh00@yahoo.com

     Pam 717 933-0222 Mon - Thu

*************************************

Share YOUR

2024 Events Directly Onto

www.Northeast WheelsEvents

Click Here!!

Photo by William Bruce

 9th Annual Glen Aubrey Fire Co

**************************************

SEE YOU ON THE RAIN DATE

Marketing & Advertising

Like What You See Here?

Reach Thousands of Active Enthusiasts Every Week! 

For Advertising

Call Pamela Hirschhorn 

717-933-0222

Your BIG Regional Calendars for Everything On Wheels www.NortheastWheelsEvents www.SoutheastWheelsEvents www.WestCoastWheelsEvents www.UKWheelsEvents

Support Our Advertisers

© 2024   Created by Great American Services.   Powered by

Badges  |  Report an Issue  |  Terms of Service